CEIS, centro de ensayos Innovación y servicios

Noticias Ceis

• CEIS sponsors the Eurovent Summit, for the third time in a row

  24-10-2022 | CEIS | Energy performance tests

  CEIS will sponsor for the third consecutive time the Eurovent Summit, the most important international event for the Air Conditioning and Refrigeration industry in Europe, Middle East and North Africa, which will take place from 25-28 October in Antalya, Turkey. This year’s Eurovent Summit is co-organised with ISKID, the Turkish Air Conditioning and Refrigeration Manufacturers […]

• Compressive stress at 10 % strain

  15-06-2022 | Thermal insulation tests

  It is one of the main mechanical properties of thermal insulation products. Compressive stress at 10 % strain is determined according to the standards EN 826 / ISO 29469. This parameter can be used to establish the stresses at which to perform compressive creep tests (long-term reduction in thickness due to the pressure exerted on […]

• Dynamic stiffness

  07-06-2022 | Thermal insulation tests

  Dynamic stiffness is related to the acoustic insulation properties also exhibited by thermal insulation products, in particular the materials used under floating floors in dwellings to reduce the impact noise. According to the applicable standard, UNE-EN 29052-1:1994 (ISO 9052-1:1989), the aim is to determine the frequency of the fundamental vertical vibration (resonance frequency) of a […]

• Thermal conductivity and thermal resistance

  03-05-2022 | Thermal insulation tests

  Low thermal conductivity is one of the main characteristics of thermal insulation materials. The testing procedure to determine the thermal conductivity and resistance of building materials is mainly set forth in UNE-EN 12667:2002. This standard is applicable to all products with an expected thermal resistance equals to or higher than 0.5 m2·K/W. In order to […]

• The heat pump, an alternative for the future

  16-03-2022 | CEIS | Energy performance tests | News

  The European Commission (EC) published its plans to reduce Europe’s dependence on fossil fuels “well before 2030”. The gradual elimination of dependence on fossil fuels can be achieved by 2030. To this end, the Commission proposes the REPowerEU plan, which will increase the resilience of the energy system at EU level, based on: – Diversifying […]

• CEIS obtains the recognition LENOR Chile

  27-01-2022 | Energy performance tests | News

  CEIS testing laboratory, obtains the recognition LENOR Chile to carry out tests on air conditioning equipment. The CEIS test center has been recently recognized by LENOR Chile, a Chilean certification body for tests carried out on air conditioning equipment whose power is below 12kW according to the ISO 5151:2017 standard within its certifying processes. This […]

• PE100RC pipe new tests

  25-01-2022 | News | Pipe tests

  The new revisions of the UNE-EN 1555 standard series “Plastics piping systems for the supply of gaseous fuels – Polyethylene (PE) and UNE-EN 12201 “Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)” as the main new feature include a new material, i.e. PE100RC, ultra-resistant to the main enemy […]

• First independent laboratory in Spain to carry out tests for Refrigerated Display Cabinets

  25-01-2022 | News

  CEIS has once again taken on the challenge of innovation, undertaking a new project that will add new testing possibilities for Refrigerated Display Cabinets to its offer. Always based on the most advanced technology, it will provide highly reliable results. By the end of 2022, CEIS plans to set up a new test station exclusively […]

• New corporate website CEIS

  11-01-2022 | Sin categoría

  CEIS has present its new website with a completely renewed design, focused on the four strategic sectors to which it directs its activity: the electrical sector, air conditioning equipment, energy efficiency and plastic piping systems. Users now have at www.ceis.es a bilingual site, in Spanish and English, adapted to all devices, and which in a […]

• SABS and CEIS extend their collaboration

  13-09-2021 | News | Pipe tests

  The South African certification body South African Bureau of Standards (SABS) and CEIS have extended the collaboration agreement by which this body recognises our plastic pipe tests within its certification schemes. This renewal shows the interest of the South African body to continue with the collaboration established with CEIS since 2016, confirming our ability to […]